XINHUI GARMENTS / CUSTOM MEN’S STREETWEAR
CUSTOM HEAVYWEIGHT
HOODIE &
SWEATPANTS SET.
Develop a custom heavyweight hoodie & sweatpants set for your streetwear label. Cement-grey sweatshirt fabric creates a structured hoodie above a broad, straight trouser leg. Define both garments around your fabric, fit, artwork and size-pairing requirements.
Xinhui Garments is an OEM/ODM streetwear manufacturer in Humen, Dongguan, China, serving brands in Europe, North America, Australia and other international markets.
Custom production only. No ready stock or dropshipping. Detailed quotes follow review of your drawings or tech pack. For sets, state top and bottom piece counts; set composition and minimums are confirmed in the quote. Images are AI-generated design concepts, not physical production samples.
FRONT VIEW / DESIGN
WEIGHT.
WITH SHAPE.
A substantial upper half balanced with a wide, uninterrupted leg.
01 / 06
Weight expressed through shape.
Cement-grey sweatshirt fabric creates a structured hoodie above a broad, straight trouser leg. Curved seams and small rust-colored embroidery connect the two pieces without covering them in repeated graphics. The hoodie is deliberately boxy; the pants remain wide through the knee and finish with an open hem.
DESIGN DIRECTION
A boxy pullover hoodie with a substantial hood and curved kangaroo opening, paired with wide straight-leg sweatpants, curved knee seams and small coordinated rust embroidery.
MATERIAL DEVELOPMENT
A dense sweatshirt-knit direction with a loopback-style interior and coordinated rib. Confirm fiber content, GSM, handle, dimensional stability and trim compatibility from physical samples.
BACK VIEW / DETAILS
QUIET BACK.
STRONG OUTLINE.
A quiet reverse emphasizes the full silhouette.
02 / 06
Give the reverse room to breathe.
The back keeps the hood and shoulder line clear, with a restrained rear-pocket treatment on the pants. This quieter surface balances the front embroidery. Assess back width and seat ease together, then position any additional branding where it will remain visible without landing inside a seam or pocket opening.
BACK & INTERIOR
Document the hoodie back, rear trouser pocket and any separate rear artwork placement.
SAMPLE CHECK
Body and rib shade relationship, hood balance, pocket access, embroidery backing, knee-seam position and finished dimensions of both pieces after the agreed care process.
FIT STUDY / 03
TWO PIECES.
ONE PROPORTION.
- HOODIE LENGTHSet its relationship to the waist.
- PANT RISEReview seated and standing fit.
- OPEN HEMApprove width over footwear.
- SIZE PAIRINGConfirm quantities for both pieces.
03 / 06
Fit the outfit as two connected garments.
A heavy hoodie can change how the trouser waistband and rise read on-body. Review the hoodie length against the waistband while standing and seated, then confirm the pants over the intended footwear. Use separate measurement charts rather than assuming the same size label automatically creates the right top-to-bottom proportion.
TWO SIZE CHARTS
Top: chest, shoulder, body length, sleeve, hood and rib openings. Pants: relaxed/extended waist, hip, rise, thigh, inseam and leg opening. Include intended top-to-bottom size pairing.
SIZE PAIRING
Specify the intended top and bottom size pairing and quantities for each piece. Review the full outfit on-body; record finished measurements for both garments before bulk approval.
DEVELOPMENT SPECIFICATION
- Top & bottom measurements
- Top: chest, shoulder, body length, sleeve, hood and rib openings. Pants: relaxed/extended waist, hip, rise, thigh, inseam and leg opening. Include intended top-to-bottom size pairing.
- Material direction
- A dense sweatshirt-knit direction with a loopback-style interior and coordinated rib. Confirm fiber content, GSM, handle, dimensional stability and trim compatibility from physical samples.
- Construction
- A boxy pullover hoodie with a substantial hood and curved kangaroo opening, paired with wide straight-leg sweatpants, curved knee seams and small coordinated rust embroidery.
- Sample review
- Body and rib shade relationship, hood balance, pocket access, embroidery backing, knee-seam position and finished dimensions of both pieces after the agreed care process.
- Quantity basis
- MOQ starts from 50 pieces. For two-piece sets, specify top and bottom quantities separately; set composition and minimums by style and color are confirmed in the quotation.
- Branding & packing
- Provide artwork for each piece, label positions and whether the garments should be paired in one pack. Confirm packing and size identification before bulk.
Development options, not fixed specifications. Confirm both garments, materials, measurements and size pairing on your samples.
MATERIAL & CRAFT / 04
KNIT.
RIB.
SEAMS.
- KNIT HANDLEChoose structure on a swatch.
- RIB RECOVERYReview tension with the body.
- SHADE RELATIONSHIPApprove both garments together.
04 / 06
Make fabric and trims work as a set.
The broad body depends on fabric handle as much as on measurements. Review the hood, rib recovery and curved seam intersections on the selected knit. Check embroidery support without excessive stiffness, and assess both garments after the agreed wash or care trial before approving the shade relationship and finished size.
MATERIAL CHOICE
A dense sweatshirt-knit direction with a loopback-style interior and coordinated rib. Confirm fiber content, GSM, handle, dimensional stability and trim compatibility from physical samples.
SET CONSISTENCY
Body and rib shade relationship, hood balance, pocket access, embroidery backing, knee-seam position and finished dimensions of both pieces after the agreed care process.
ON-BODY / 05
VOLUME
IN MOTION.
Grey volume, small rust accents, open hems.
05 / 06
Volume with a clear vertical line.
The muted grey palette lets the seam construction and small rust accents remain visible in daylight. A low viewpoint emphasizes the open trouser hem, while a walking pose shows how the heavier knit falls. Use the images to discuss styling direction; confirm actual drape and movement on your samples.
COLLECTION CONTEXT
Review hem clearance, knee movement and how the hoodie settles at the waistband.
CONCEPT IMAGERY
These AI-generated images illustrate an original development direction, not physical samples or ready-stock items. The approved physical samples define the production garments.
YOUR BRIEF / 06
YOUR SET.
YOUR SIZE PAIRING.
- 01 / BOTH PIECESFront, back and construction drawings.
- 02 / SIZE PAIRINGTop and bottom size charts and ratios.
- 03 / MATERIALSFabric, shade, artwork and trims.
- 04 / QUANTITIESPiece counts, set packing and timing.
06 / 06
Brief the complete sweatshirt set.
Send drawings for both pieces, fabric and weight preferences, separate measurement charts, embroidery files and trim references. List top and bottom quantities by size and explain how they should be paired. We review the complete construction for quotation, develop the agreed samples and record approvals before the bulk order.
QUANTITY & SAMPLING
MOQ starts from 50 pieces. For two-piece sets, specify top and bottom quantities separately; set composition and minimums by style and color are confirmed in the quotation. Sample lead time is 7–20 days for the agreed development scope; revisions and bulk schedules are confirmed separately.
APPROVAL BEFORE BULK
Approve both pieces, color relationship, fit, decoration, trims, labels and packing before bulk production. Confirm any required product testing and report scope for the project.
BEFORE YOU SEND YOUR BRIEF
What fabric weight is used?
No fixed GSM is implied by the images. Share the weight and handfeel you want; the chosen knit and rib are confirmed during sampling.
Can the pants have elastic cuffs?
Yes. A cuffed version changes the leg line and finished length. Include cuff opening and stretch requirements in the pants chart.
Does 50 pieces mean 50 complete sets?
Not automatically. Our starting MOQ is expressed in pieces. Tell us how many tops and bottoms you need; set composition and applicable minimums are confirmed in your quotation.
HOW CUSTOM STREETWEAR ORDERS WORK
FROM YOUR DESIGN.
TO YOUR DELIVERY.
For made-to-order streetwear, the path starts with your design files. We review your requirements, quote and make a sample for your approval before you confirm a bulk order.
- 01 / INQUIRY & BRIEF
Send your design and requirements.
Share your drawings or tech pack, preferred fabric and weight, fit, artwork files, estimated quantity and target timing. We clarify missing details before pricing.
- 02 / REVIEW & QUOTE
Get a project-specific quotation.
We assess fabric, construction, decoration placement and quantity, then quote from the submitted design and specifications. We also agree on the sample scope; later design changes may affect the final price.
- 03 / SAMPLE DEVELOPMENT
See the garment in real life.
We develop a sample to check fit, fabric feel, decoration placement, color and finishing. The stated sample lead time is 7–20 days, subject to the agreed sample brief.
- 04 / SAMPLE APPROVAL
Review, revise and sign off.
You check the physical sample and send feedback. We agree any revisions, update the production specification and obtain your approval before bulk production.
- 05 / BULK ORDER
Confirm the order details.
After sample approval, confirm the final quantity, color and size breakdown, artwork placement, labels, packaging, price, payment terms and delivery schedule in the purchase order.
- 06 / PRODUCE & DELIVER
Make, inspect and ship.
We prepare materials, cut, decorate and sew the garments, with photo and video updates at key stages. Finished goods are inspected, packed and handed over under the agreed shipping terms.
Timing note: Sample revisions can add time. The 7–20 day figure is for sampling, not bulk production or shipping. We confirm the bulk schedule after sample approval and order details are agreed.
CUSTOM PRODUCTION / OEM & ODM
TELL US ABOUT
YOUR DESIGN.
Share the essentials for your heavyweight hoodie & sweatpants set project: structured hood, sculpted seams, wide open-hem pants. State top and bottom piece counts and the intended size pairing. MOQ starts from 50 pieces; set composition and minimums are confirmed in the quote. Your answers prepare a WhatsApp draft for review. A detailed quote follows assessment of your drawings or tech pack.
After WhatsApp opens, attach any design drawings, tech pack or material references you have in the chat. Files cannot be attached through this form.